1st - Lights
It is critical to locate lights which are not
working. The more lights which are not working on a light string, the more
electricity the working lights have to consume. For example, if you have a 50
light set, each light consumes 1/50th of the electricity in the
string. If 10 lights are not working, the 40 lights which are working are
forced to take 20% more electricity. If this situation continues, the light
string is permanently damaged. The lights will
not work and each of the lights have a brown tinge. Light manufactures
do not cover this type of damage in their warranty.
The goal is to locate and replace any burned out
lights. Turn on the lights on the tree. Starting at the top, trace the wire
for the light string and make sure each light is functioning. If you find a
non-working light, immediately replace the bulb. If you run out of bulbs, then
mark the non-working light with brightly color string or tape for replacement
when you get more bulbs.
2nd - Compress Tree
The goal is to compress the branches of the tree in
an orderly fashion to preserve the lights, needles and branches.
To help understand what we are working with, look
at the bottom row of branches on the tree. For a 7.5' tree, there is usually
6-8 main branches attached to the center pole. Each of these main branches have baby branches attached. Below, we discuss how to fold the baby
branches back to the main branch. This is why we call it un-fluffing. When you
put the tree up, you fluffed or styled the tree to make it full and pretty. Now we want
to make it skinny.
Starting at the outer, top of the tree, carefully
fold the baby branches toward the larger main branches. Work your way around
the top branches and then move down to the next row of branches until the entire
tree is un-fluffed.
It is a common mistake to simply put the tree back
in the box without un-fluffing the tree. This causes problems compressing
the tree into a smaller space. By folding the baby branches
toward the main branch, the tree fits into a smaller space and the needles /
branches are less likely to be damaged.
3rd - Take Apart
Remove the top section of the tree. Turn the top
upside down and gently press the branches toward the center pole. Lay the top
on its side out of the way for a moment. (don't put it in the bag / box yet)
Remove the center section(s) of the tree. Turn the
section(s) upside down and gently press the branches toward the center pole.
Lay the middle section(s) on their side out of the way for a moment. (don't put
it in the bag / box yet)
Loosen the bolts on the tree stand and remove the
bottom section. Turn the bottom section upside down and gently press the
branches toward the center pole.
If you have a strong twine or cloth covered bungee
cords, it is a good idea to wrap the bottom and middle sections with twine or
bungee cord to further compress the tree. You do not want to make it too tight
but just a little compression makes the next step easier.
Make sure that when you are folding the branches
toward the center pole that the light strings do not get caught or pinched in
the hinges. If the branches are not easily folding toward the center pole, do
not force it.
4th - Pack It Up
Place the bottom section into the box / bag first.
If you still have the plastic end cap, place it over the end which goes in the
tree stand. The cap will help prevent this pointed end from going through the
side.
Position the bottom section so the pointed end of
the center pole is in the middle of the bag and the non-pointed end is at one
end of the box/bag or the other.
Position the middle section so the widest part of
the section is at the other end of the box/bag.
Position the top section,
tree stand and any other
parts in the middle of the box / bag.
5th - Where to put it?
The following are the general guidelines when
storing an artificial Christmas tree. Frosted, flocked or white Christmas trees
are particularly sensitive to extreme temperatures and humidity. These types of
trees discolor rapidly in hot and humid storage conditions. Keep the
Temperature - 40 to 90 degrees Fahrenheit
Humidity - As low as possible.
No animals - Birds, mice and rats love to live in artificial
Christmas trees.
Article Source: EzineArticles.com
No comments:
Post a Comment